Skip to main content Skip to search Skip to main navigation
Welding products for professionals
Craftsmanship since 1978
Delivery within the EU

Contact tips

Frequently asked questions about Contact tips

Check three things: the wire diameter (for example 0.8, 1.0 or 1.2 mm), the wire type and the thread of the contact tip holder (M6 or M8).
Replace the contact tip when the bore has worn oval, spatter has built up or the wire snags. A worn tip causes an unstable arc and poor current transfer.
M8 contact tips are thicker and heavier than M6 tips. They dissipate heat better and often last longer at higher amperages. Which one you need depends on your torch's contact tip holder.
A contact tip with a slightly larger bore is often used for aluminium wire, as aluminium expands more with heat. This prevents the wire from seizing in the tip.

Contact tips for MIG/MAG torches

The contact tip transfers the welding current to the wire and guides the wire to the weld pool. A good contact tip ensures a stable arc and consistent wire feed.

In this category you will find contact tips with M6 and M8 thread in various wire diameters, suitable for MB torches from the MB15 to the MB501. Choose a contact tip that matches your wire diameter, wire type and the contact tip holder of your torch.