Skip to main content Skip to search Skip to main navigation
Welding products for professionals
Craftsmanship since 1978
Delivery within the EU

Back caps

Frequently asked questions about Back caps

A long cap accommodates a full 175 mm tungsten electrode. A short cap makes the torch more compact for tight spots but requires a shorter electrode. A medium cap is an in-between solution.
Back caps are interchangeable within a torch family, such as WP9 and WP20, or WP17, WP18 and WP26. The WP12 and WP22 require their own caps.
The O-ring provides a gas-tight seal. If it is damaged, air can be drawn in, resulting in poor gas coverage and porous welds.
Possibly. If the cap is not tightened properly or the thread is worn, the collet does not clamp correctly. Also check that the collet is the right size and not worn.

TIG back caps in short, medium and long

The back cap closes off the rear of the torch body. Tightening the cap clamps the collet and thus the tungsten electrode. A good back cap also provides a gas-tight seal.

In this category you will find back caps in short, medium and long versions for the WP9/20, WP17/18/26, WP12 and WP22. The length of the cap determines how long the electrode can be and how compact the torch becomes.