Skip to main content Skip to search Skip to main navigation
Welding products for professionals
Craftsmanship since 1978
Delivery within the EU

Torch necks

Frequently asked questions about Torch necks

Replace the torch neck if the insulation is damaged, the thread is worn, it leaks or the torch overheats. A hard knock can also cause internal damage to the neck.
No. A water-cooled neck has channels for coolant and only fits a water-cooled torch. Always choose a neck that matches the cooling and type of your torch.
No, gas nozzles, gas diffusers and contact tip holders differ per torch type. Use parts that belong to the type of torch neck.
The torch neck is attached to the handle or cable assembly with a nut. Tighten it firmly and check for gas or coolant leaks after fitting.

Torch necks for MIG/MAG torches

The torch neck is the curved front part of the MIG torch. It carries current, gas and wire to the contact tip and determines your welding angle. In case of damage or wear, you replace the neck while continuing to use the cable assembly.

In this category you will find gas-cooled torch necks for the MB15, MB24, MB25, MB26 and MB36 and water-cooled torch necks for the MB24W, MB401 and MB501. You will also find matching gas nozzles, gas diffusers and insulating rings.