MB 36
Frequently asked questions about MB 36
The MB36 is intended for heavier MIG/MAG welding at higher amperages, for example on thicker material in fabrication and production. It is a good alternative if you do not want to use a water-cooled torch.
The MB36 uses a 50 mm² coaxial cable, available in 3, 4 and 5 metres. This large cross-section is required for the higher amperages.
An extra conical gas nozzle tapers sharply. This gives you a better view of the weld pool and easier access to corners and narrow joints.
Contact tip holders with M6 and M8 thread are available for the MB36. At higher amperages, M8 is often the best choice, as the contact tip is sturdier and lasts longer.
MB36 MIG torch for heavier gas-cooled welding
The MB36 is the heaviest gas-cooled torch in the MB series. It is suitable for higher amperages and thicker material, without the need for a water-cooled setup.
In this category you will find the complete MB36 torch and all associated parts: torch neck, extra conical gas nozzles, gas diffusers, contact tip holders with M6 or M8 thread, contact tips, 50 mm² coaxial cables, handle and switch.